DEEPTECH OCT 22, 2026

Kobe Team Builds Top-Emission Deep-UV LED With 35% Efficiency Gain

NICT researchers achieve 35% efficiency gain over flip-chip designs using micro-ring electrodes and nano light extraction, simplifying manufacturing while boosting performance.

KOBE — Researchers at the National Institute of Information and Communications Technology have built what they describe as the world’s first high-efficiency top-emission deep-ultraviolet LED. The device reaches 35% higher wall-plug efficiency than standard flip-chip designs, the government-backed institute announced October 22.

The LED emits 275-nanometer light with 6.5% wall-plug efficiency and 7.5% external quantum efficiency. Shin-ichiro Inoue, who leads NICT’s Deep-Ultraviolet ICT Research Group at the Kobe Frontier Research Center, said the team pulled light straight out of the chip’s top surface. Micro-ring electrodes surround a hafnium-oxide nano-structure, and that layout removes the flip-chip bonding step that makes current manufacturing harder.

Most deep-UV LEDs work differently. The wafer is flipped and bonded to a submount, and light leaves through the sapphire substrate. That adds process steps. It also traps photons at the sapphire-semiconductor boundary, because the two materials bend light by different amounts. Top emission has been the goal for years, but the p-type contact layers absorb deep-UV light strongly, so surface extraction stayed inefficient. NICT’s ring electrodes deliver current without blocking the light that comes out. The nano-scale extraction layer cuts down total internal reflection and widens the angle at which photons can escape the semiconductor.

Deep-UV LEDs are replacing mercury lamps in sterilization, medical equipment and semiconductor tooling. That shift picked up speed after the 2017 Minamata Convention began phasing out mercury. Cost and efficiency still hold back adoption, and a structure that cuts manufacturing steps while raising output tackles both. The findings appeared in ACS Photonics on October 21 and were selected for the journal’s supplementary cover. NICT has not said when the device might reach commercial use, or which industry partners it is working with.